To inquire for this product  |  USA   /   English
DIGITAL AUDIO DACs
AK4371
Low Power 24-Bit DAC with HP-Amp, Mixer, Lineout & PLL
The AK4371 is 24-bit DAC with an integrated PLL and headphone amplifier. The PLL input frequency is synchronized to typical mobile phone clock frequencies. The AK4371 features an analog mixing circuit that allows easy interfacing in the mobile phone and portable communication designs. The integrated headphone amplifier features “pop-noise free” power-on/off, a mute control, and it delivers 40mW of power into 16omega. The AK4371 is packaged in a 32-pin QFN (4mm×4mm) package, ideal for portable applications.

AK4371
  1. Applications: Mobile Phone, PDA, Portable Media Player
  2. Multi-bit deltasigma DAC
  3. Sampling Rate
       - 8kHz, 11.025kHz, 12kHz, 16kHz, 22.05kHz, 24kHz, 32kHz,
        44.1kHz and 48kHz
  4. On chip perfect filtering 8 times FIR interpolator
       - Passband: 20kHz
       - Passband Ripple: ±0.02dB
       - Stopband Attenuation: 54dB
  5. Digital De-emphasis Filter: 32kHz, 44.1kHz and 48kHz
  6. System Clock
       - PLL Mode (MCKI): 27MHz, 26MHz, 19.8MHz, 19.68MHz, 19.2MHz,
    15.36MHz, 14.4MHz, 13MHz, 12MHz and 11.2896MHz
       - PLL Mode (BICK or LRCK): 64fs, 32fs or fs
       - EXT Mode: 256fs/384fs/512fs/768fs/1024fs
       - Input Level: AC Couple Input Available
  7. Audio I/F Format: MSB First, 2’s Complement
       - I2S, 24bit MSB justified, 24bit/20bit/16bit LSB justified
       - Master/Slave Mode
  8. Digital Mixing: LR, LL, RR, (L+R)/2
  9. Bass Boost Function
  10. Digital ATT
  11. Analog Mixing Circuit: 6 Inputs (Single-ended or Full-differential)
  12. Stereo Lineout
       - S/N: 90dB@3.3V
       - Output Volume: +6 to –24dB (or 0 to –30dB), 2dB step
  13. Mono Hands-free Output
       - Output Power: 0.8mW @ 600omega 3.3V
       - Output Volume: +6 to –24dB (or 0 to –30dB), 2dB step
  14. Headphone Amplifier
       - Output Power: 40mW x 2ch @16omega, 3.3V
       - S/N: 92dB@3.3V
       - Pop Noise Free at Power-ON/OFF and Mute
       - Output Volume: 0 ~ –63dB & +12/+6/0 dB Gain 1.5dB step (0 ~ –30dB),
    3dB step (–30 ~ –63dB)
  15. microP Interface: 3-wire/I2C
  16. Power Supply: 1.6V ~ 3.6V
  17. Power Supply Current: 3.8mA @1.8V (6.8mW, DAC+HP, No output)
  18. Ta: -30 ~ 85°C
  19. Small Package: 32pin QFN (4mm x 4mm, 0.4mm pitch)
  20. Register Compatible with AK4368
  21. Evaluation Board: AKD4371
PDF
Download		 PDF Data Sheets
Rev. MS0596-E-01 2008/12
PDF : 1095KB / 74pages		 PDF Evaluation Board Manual
Rev. KM086201 2007/07
PDF : 939KB / 33pages
AK4371 BLOCK DIAGRAM
AK4371 BLOCK DIAGRAM
To inquire for this product  |  USA   /   English