Electronic Parts Packaging Materials
Business Outline Product Information / Solving Problems
Taping machine
This taping machine automatically seals the cover tape and winds the reel electronic parts are manually inserted into an embossed carrier tape.
PTS-180 Specifications
Applicable parts | Various electronic parts, etc. |
---|---|
Type | Embossed carrier tape |
Carrier tape width (mm) | 8・12・16・24・32・44・56・72(mm) |
Diameter of carrier reel | Standard:φ420mmMAX Option:Φ700mmMAX |
Diameter of cover tape reel | Standard:φ210mm Core:2inch, 3inch Option available |
Change in variety | Adjustment of rail slide, replacement of heating irons and guides |
Time to change variety | About 15 minutes |
Sealing method | Heat and pressure reciprocating method.Room temperature to 200°C |
Seal drive system | Air cylinder-driven system |
Drive system | Five-phase stepping motor |
Cycle | About 0.4 seconds/pitch |
Operating time | Depends on settings |
Power source / power consumption | AC100V 50/60Hz 200W |
Air source | Clean and dry air 4kgf/cm2 |
Equipment size | 1160(W)×360(D)×640(H)mm |
Equipment weight | Approx. 26 kg |
*Product specifications and appearance may change for improvement without prior notice.
This tester measures and records the peel strength of cover tape sealed to embossed carrier tape.
PFT-50/50S Specifications
Applicable tape width | 8、12、16、24、32、44、56、72mm |
---|---|
Peel strength | 120、300,1000mm/min (PFT-50 has 300 mm/min only) |
Peeling angle | 170° |
Peel strength measurement range | 0~200g |
Length of measurement tape | 150mm |
Output of measurement unit | 0~10V |
Power source | AC100V 50/60Hz |
Main unit size | 500(W)×160(D)×150(H)mm |
Main unit weight | Approx. 10 kg |
Recorder specifications
Paper width | 100mm |
---|---|
Output range | 100g、200g 2range |
Size | 206(W)×270(D)×100(H)mm |
Weight | Approx. 8kg |
*Product specifications and appearance may change for improvement without prior notice.
*Components: Main unit, power cable, output cable, recorder
Available in various sizes and materials, including polycarbonate, PS, and PVC.
High quality to protect products inside, while enabling smooth removal.
A wide range of stoppers are available, enabling use without making a new mold, reducing costs.