 |
PRECAUTIONARY
NOTES ON USE OF ASACLEAN®
 
1.Basic knowledge
-
1-1 Why is Purging Compound Necessary
?
1-2 Kinds of Purging Compounds and
their Characteristics
1-3 The Features of ASACLEAN®
- 2.Purging Operations
- 2-1 ASACLEAN® Type Selection
2-2 Use Methods of ASACLEAN®
(Injection molding•Basics)
2-3 Use Methods of ASACLEAN®(Injection
molding•Applications)
2-4 Use Methods of ASACLEAN®
(Cleaning of Extruders)
2-5 ASACLEAN® Quantities
for Effective Cleaning
- 3.Countermeasures against Contamination
- 3-1 Kinds of Contamination and Countermeasures
against them
3-2 Mechanism of "burnt resin"
3-3 Preventive Measures against "burnt
resin"
- 4.Cost Merits
- 4-1 Calculation Table of Cost Merits
by Using ASACLEAN®
- 1.Cleaning Methods for Injection Molding Machines
-
1-1 In case of insufficient
Purging with "Basic purging Method ( -2-2)"
1-2 Cleaning of the site where Cleaning
is difficult (Nozzle and Vent Hole)
1-3 Cleaning of Hot Runner Molds
- 2.Cleaning Methods for Molding
Machines with Extruders
- 2-1 Cleaning Method of Extruders
2-2 Cleaning Method of Pelletizer
(extruders for coloring and compounding)
2-3 Cleaning Method of Extruders
with T-die (sheet, film, laminate)
2-4 Cleaning Method of Blow Molding
Machines
- 3.Countermeasures against Defects due to Contaminants
- 3-1 Way to distinguish the Causes
of Contaminants Generation and
Countermeasures against them
3-2 Sealing with ASACLEAN®
3-3 Effective Way of Cleaning
with ASACLEAN® Pre-overhauling
|