Asahi KaseiAsahi Kasei Advance Corporation

Oil-absorbent mat Lookmat®Oil-absorbent mat Lookmat®

Necessity of oil-absorbent mat
  • Security of workers (prevention of accidents)

    Around kitchen fryers or in workplaces of factories, oil is dispersed to produce slippery floors.
    We recommend that you lay oil-absorbent mats on floors of the above-mentioned places to prevent your workers from falling on slippery floors.

  • Prevent spread of stains on shoe soles

    Stains on shoe soles can be cleaned on oil-absorbent mats on floors.

Example uses in kitchen Example uses in factory
Example uses in kitchen Example uses in factory

Lookmat®

Application Oil absorbent material
Material Polypropylene
Product No. (Spec.) KS4024(40cm W. x 24 m roll)
KS4050(40cm W. x 50 m roll)
KS8025(80cm W. x 25 m roll)
Perforations Approx. 25 cm interval
Lot size At least 1 roll
Case size KS4024(34 cm high x 33 cm wide x 41 cm deep)
KS4050(49 cm high x 42 cm wide x 49 cm deep)
Disposal Follow your local government's rules and regulations to dispose of oil-containing mats
Differences from competing products
Comparison of oil absorbing power
(Times)
Comparison of oil absorbing power

--- competing products

--- Lookmat®

Salad oil Machine oil Heavy oil

* The above-mentioned values are measures values, not guaranteed values.

Example applications of Lookmat®
  • Example 1: Major Supermarket A

    Employees slipped accidentally around fryers (Work accident).
    A competing product was used, but it was replaced by our Lookmat®, which comes on a longer roll than the old one, and is less expensive per roll.

  • Example 2: Supermarket B

    Cardboard sheets were laid around fryers, but for hygienic reasons, our Lookmat® was adopted.
    Although costs are higher, their corporate efforts to make their kitchens "More hygienic, safer" resulted in adoption of oil absorbent mats.

  • Example 3: Major bread maker C

    Lookmat® is laid around floors of their fried dough manufacturing line.

  • Example 4: Major metalworking company D

    Our Lookmat® is used to absorb oil which is generated during metal working processes.
    They adopted our product because the amount of oil absorbed is larger than those of competing products and the frequency of replacement of mats is less.

Precautions for use

Be sure to use our mats with the label sides facing upward.
The front (label) side of our product is hard to become fluffy and the back side is suitable for absorbing and retaining oil.
If you run on a mat, it may slide on the floor.
Use only to absorb oil.

Contact Us | Terms and Conditions | Privacy Policy
Copyright © Asahi Kasei Advance Corporation. All rights reserved.

Asahi Kasei Advance Corporation