EUTEC™ MF Microfilters (solid-liquid separation)

EUTEC™ MF / AM series product description

Glass Fiber + PET unwoven Economy typeA-GEM/A-GAE

For filtration of general mineral oils and synthetic oils

(1) Applications Filtration of general mineral oils and synthetic oils, etc.
(2) Characteristics A low-cost alternative to the A-GPE series, with fewer component parts
(3) Materials Glass fiber + PET + PP
(4) Filter rating abs 1.0μm ~ 30μm
(5) Dimensions OD (outer diameter) φ70 x 10 inch ~ 30 inc
(6) Max. operating temperature 80℃ (*may vary depending on target fluid)
(7) Max. operating pressure 0.49MPa
Materials
A-GAM
1. Gasket
Polypropylene (PP)
2. Plate
Polypropylene (PP)
3. Net
Polyester (PET)
4. Secondary filter media
Inorganic fiber
5. Main filter media
Polyester (PET)
6. Secondary filter media
Polypropylene (PP)
7. Support net Polypropylene (PP)
8. Internal casing  
A-GAE
1. Plate
Polypropylene (PP)
2. Secondary filter media Polyester (PET)
3. Main filter media
Inorganic fiber
4. Secondary filter media
Polyester (PET)
5. Internal casing
Polypropylene (PP)
6. Gasket
 
Specifications
A-GAM/A-GAE series 022 045 100 300 500 10E
Absolute filter rating (μm) 1.0 3.0 6.0 12 20 30
Dimensions Overall length (mm)
A-GAM 10inch(250mm) 20inch(500mm) 30inch(750mm)
A-GAE 10inch(250mm) 20inch(500mm) 30inch(750mm)
Outside diameter (mm)
70
Inside diameter (mm)
25.9
Filter surface area (cm2)   3200 3500 3600 3700
  3400 3700 3750 3900
Max. operating temperature (℃) 80
Max. operating pressure (MPa) 0.49

* [Filter surface area] indicates surface area per every 10 inches of length.
* [Max. operating temperature] indicates maximum operating temperature when passing water (hot water) through the filter media.

Model code
AMSP
a~c
Filter rating
Code Rating
022
abs.
1.0μm
045
abs.
3.0μm
100
abs.
6.0μm
300 abs.
12μm
500 abs.
20μm
10E abs.
30μm
d1
Length indicator
Code Length
1
10
inch
2
20 inch(gasket)
9
20 inch (O-ring)
3 30
inch
d2
Length indicator
Code Length
1
10
inch
2
20
inch
3 30
inch
e
Seal shape
Code Shape
F Flat DOE
T 226 O-ring SOE
Fin○
P 226 O-ring SOE
Fin×
W 222 O-ring SOE
Fin○
M 222 O-ring SOE
Fin×
  • DOE;Double Open End
    (both ends open)
  • SOE;Single Open End (bottom end open)
  • Fin○;Finned
  • Fin×;Finless
f
Gasket / O-ring material
Code Material
N
NBR
S
Silicon
E
EPR
V
FPM
T PTFE (gasket)
F PFA capsule
(O-ring)
R Soft PTFE
(gasket)
Flow rate / pressure drop characteristics
Flow rate / pressure drop characteristics
Asahi Kasei Corporation

Applied Products Sales Department, Nonwoven Fabrics Division
Hibiya Mitsui Tower 1-1-2 Yurakucho, Chiyoda-ku, Tokyo 100-0006, JAPAN
TEL 03(6699)3804
FAX 03(6699)3882

Contact us

Product Variations

EUTEC™ MS

PLANNING CARD

Contact us

EUTEC™ Site map