EUTEC™ MF Microfilters (solid-liquid separation)

EUTEC™ MF / AM series product description

Glass Fiber + PET unwoven General-purpose type filterA-GPE

For filtration of general mineral oils, synthetic oils and microparticles suspended in gas, etc.

(1) Applications Filtration of general mineral oils, synthetic oils and microparticles suspended in gas, etc.
(2) Characteristics Utilize a complex filter medium composed of glass and PET fibers to achieve a stable filter rating and long service life
(3) Materials Glass fiber + PET + PP
(4) Filter rating abs 1.0μm ~ 30μm
(5) Dimensions OD (outer diameter) φ70 x 10 inch ~ 30 inc
(6) Max. operating temperature 80℃ (*may vary depending on target fluid)
(7) Max. operating pressure 0.49MPa
Materials
1. External casing
Polypropylene (PP)
2. Support net
Polypropylene (PP)
3. Secondary filter media
Polyester (PET)
4. Main filter media
Inorganic fiber
5. Support net Polypropylene (PP)
6. Internal casing
Polypropylene (PP)
7. Plate
Polypropylene (PP)
8. Gasket  
Specifications
A-GPE series 022 045 100 300 500 10E
Absolute filter rating (μm) 1.0 3.0 6.0 12 20 30
Dimensions Overall length (mm)
10inch(250mm) 20inch(500mm) 30inch(750mm)
Outside diameter (mm)
70
Inside diameter (mm)
25.9
Filter surface area (cm2) 3500 3700
Max. operating temperature (℃) 80
Max. operating pressure (MPa) 0.49

* [Filter surface area] indicates surface area per every 10 inches of length.
* [Max. operating temperature] indicates maximum operating temperature when passing water (hot water) through the filter media.

Model code
A-GPE
a~c
Filter rating
Code Rating
022
abs.
1.0μm
045
abs.
3.0μm
100
abs.
6.0μm
300 abs.
12μm
500 abs.
20μm
10E abs.
30μm
d
Length indicator
Code Length
1
10
inch
2
20
inch
3
30
inch
e
Seal shape
Code Shape
F Flat DOE
T 226 O-ring SOE
Fin○
P 226 O-ring SOE
Fin×
W 222 O-ring SOE
Fin○
M 222 O-ring SOE
Fin×
  • DOE;Double Open End
    (both ends open)
  • SOE;Single Open End (bottom end open)
  • Fin○;Finned
  • Fin×;Finless
f
Gasket / O-ring material
Code Material
N
NBR
S
Silicon
E
EPR
V
FPM
T PTFE (gasket)
F PFA capsule
(O-ring)
R Soft PTFE
(gasket)
Flow rate / pressure drop characteristics
Flow rate / pressure drop characteristics
Asahi Kasei Corporation

Applied Products Sales Department, Nonwoven Fabrics Division
Hibiya Mitsui Tower 1-1-2 Yurakucho, Chiyoda-ku, Tokyo 100-0006, JAPAN
TEL 03(6699)3804
FAX 03(6699)3882

Contact us

Product Variations

EUTEC™ MS

PLANNING CARD

Contact us

EUTEC™ Site map