EUTEC™ MF Microfilters (solid-liquid separation)

EUTEC™ MF / AM series product description

100% polypropylene High-precision rated type filterA-MHP

For pre-filtration of strong acids and alkalis, and on pure water lines

(1) Applications Pre-filtration of acids and alkalis, and on pure water lines
(2) Characteristics 100% PP, high-precision rated filters that utilize specially treated, unwoven PP fiber
(3) Materials PP
(4) Filter rating abs 0.6μm ~ 6.0μm
(5) Dimensions OD (outer diameter) φ70 x 10 inch ~ 30 inc
(6) Max. operating temperature 80℃ (*may vary depending on target fluid)
(7) Max. operating pressure 0.49MPa
Materials
1. External casing
Polypropylene (PP)
2. Secondary filter media
Polypropylene (PP)
3. Main filter media
Polypropylene (PP)
4. Secondary filter media
Polypropylene (PP)
5. Internal casing Polypropylene (PP)
6. Plate
Polypropylene (PP)
7. Gasket
 
Specifications
A-MHP series 006 012 025 045 060
Absolute filter rating (μm) 0.6 1.2 2.5 4.5 6.0
Dimensions Overall length (mm)
10inch(250mm) 20inch(500mm) 30inch(750mm)
Outside diameter (mm)
70
Inside diameter (mm)
25.9
Filter surface area (cm2) 3900 4700 4800
Max. operating temperature (℃) 80
Max. operating pressure (MPa) 0.49

* [Filter surface area] indicates surface area per every 10 inches of length.
* [Max. operating temperature] indicates maximum operating temperature when passing water (hot water) through the filter media.

Model code
A-MHP
a~c
Filter rating
Code Rating
006
abs.
0.6μm
012 abs.
1.2μm
025 abs.
2.5μm
045 abs.
4.5μm
060 abs.
6.0μm
d
Length indicator
Code Length
1
10
inch
2
20
inch
3 30
inch
e
Filter rating
Code Shape
F
Flat DOE
T
226 O-ring SOE
Fin○
P
226 O-ring SOE
Fin×
W
222 O-ring SOE
Fin○
M 222 O-ring SOE
Fin×
  • DOE;Double Open End
    (both ends open)
  • SOE;Single Open End
    (bottom end open)
  • Fin○;Finned
  • Fin×;Finless
f
Gasket/O-ring material
Code Material
N
NBR
S
Silicon
E
EPR
V
FPM
T PTFE (gasket)
F PFA capsule (O-ring)
R Soft PTFE (gasket)
Flow rate / pressure drop characteristics
Flow rate / pressure drop characteristics
Asahi Kasei Corporation

Applied Products Sales Department, Nonwoven Fabrics Division
Hibiya Mitsui Tower 1-1-2 Yurakucho, Chiyoda-ku, Tokyo 100-0006, JAPAN
TEL 03(6699)3804
FAX 03(6699)3882

Contact us

Product Variations

EUTEC™ MS

PLANNING CARD

Contact us

EUTEC™ Site map