EUTEC™ MF Microfilters (solid-liquid separation)

EUTEC™ MF / AM series product description

PET microfiber + nylon componentsA-MWN

For filtration of chlorine-based organic solvents and trichloroethylene, etc.

(1) Applications Filtration of chlorine-based organic solvents, trichloroethylene and various other organic solvents
(2) Characteristics Handle a more diverse range of solvents through the use of PET microfiber filter media and nylon parts
(3) Materials PET + PA6
(4) Filter rating abs 0.8μm ~ abs 35μm
(5) Dimensions OD (outer diameter) φ70 x 10 inch ~ 30 inc
(6) Max. operating temperature 80℃ (*may vary depending on target fluid)
(7) Max. operating pressure 0.49MPa
Materials
1. External casing
Nylon 6 (PA6)
2. Secondary filter media
Polyester (PET)
3. Main filter media Polyester (PET)
4. Secondary filter media Polyester (PET)
5. Internal casing
Nylon 6 (PA6)
6. Plate
Nylon 6 (PA6)
7. Gasket  
Specifications
A-MWN series 006 012 018 022 045
Absolute filter rating (μm) 0.8 1.2 1.8 2.0 4.0
Dimensions Overall length (mm)
10inch(250mm) 20inch(500mm) 30inch(750mm)
Outside diameter (mm)
70
Inside diameter (mm)
25.9
Filter surface area (cm2) 3200 3800 4800 5400
Max. operating temperature (℃) 80
Max. operating pressure (MPa) 0.49
A-MWN series 100 300 500 10E 20E
Absolute filter rating (μm) 6.0 10 13 23 35
Dimensions Overall length (mm)
10inch(250mm) 20inch(500mm) 30inch(750mm)
Outside diameter (mm)
70
Inside diameter (mm)
25.9
Filter surface area (cm2) 5300 6300 4100 4800
Max. operating temperature (℃) 80
Max. operating pressure (MPa) 0.49

* [Filter surface area] indicates surface area per every 10 inches of length.
* [Max. operating temperature] indicates maximum operating temperature when passing water (hot water) through the filter media.

Model code
A-MWN
a~c
Filter rating
Code Rating
006
abs.
0.8μm
012 abs.
1.2μm
018 abs.
1.8μm
022 abs.
2.0μm
045 abs.
4.0μm
100 abs.
6.0μm
300 abs.
10μm
500 abs.
130μ
10E abs.
23μm
20E abs.
35μm
d
Length indicator
Code Length
1
10
inch
2
20
inch
3 30
inch
e
Filter rating
Code Shape
F
Flat DOE
T
226 O-ring SOE
Fin○
P
226 O-ring SOE
Fin×
W
222 O-ring SOE
Fin○
M 222 O-ring SOE
Fin×
  • DOE;Double Open End
    (both ends open)
  • SOE;Single Open End
    (bottom end open)
  • Fin○;Finned
  • Fin×;Finless
f
Gasket / O-ring material
Code Material
N
NBR
S
Silicon
E
EPR
V
FPM
T PTFE (gasket)
F PFA capsule (O-ring)
R Soft PTFE (gasket)
Flow rate / pressure drop characteristics
Flow rate / pressure drop characteristics
Asahi Kasei Corporation

Applied Products Sales Department, Nonwoven Fabrics Division
Hibiya Mitsui Tower 1-1-2 Yurakucho, Chiyoda-ku, Tokyo 100-0006, JAPAN
TEL 03(6699)3804
FAX 03(6699)3882

Contact us

Product Variations

EUTEC™ MS

PLANNING CARD

Contact us

EUTEC™ Site map