EUTEC™ MF Microfilters (solid-liquid separation)

EUTEC™ MF / AM series product description

100% polypropylene General-purpose typeA-MWP

For filtration of strong acids, strong alkalis and various organic solvents

(1) Applications Filtration of strong acids, strong alkalis and various organic solvents
(2) Characteristics 100% polypropylene general-purpose filters that use integral, single-piece molding with long unwoven fiber
(3) Materials PP
(4) Filter rating abs 1.5μm ~ nom 80μm
(5) Dimensions OD (outer diameter) φ70 x 10 inch ~ 30 inc
(6) Max. operating temperature 80℃ (*may vary depending on target fluid)
(7) Max. operating pressure 0.49MPa
Materials
1. External casing
Polypropylene (PP)
2. Secondary filter media
Polypropylene (PP)
3. Main filter media
Polypropylene (PP)
4. Secondary filter media
Polypropylene (PP)
5. Internal casing Polypropylene (PP)
6. Plate
Polypropylene (PP)
7. Gasket
 
Specifications
A-MWP series 015 020 030 040 060 01X 03X 05X
Absolute filter rating (μm) a 1.5 a 2.0 a 3.0 a 5.0 a 6.0 a 7.0 a 10 a 23
Dimensions Overall length (mm)
10inch(250mm) 20inch(500mm) 30inch(750mm)
Outside diameter (mm)
70
Inside diameter (mm)
25.9
Filter surface area (cm2) 2400 3200 3000 3200 4200
Max. operating temperature (℃) 80
Max. operating pressure (MPa) 0.49
A-MWP series 10X 30X 40X 50X 60X 70X 80X
Absolute filter rating (μm) a 32 a 42 a 40 a 50 a 60 a 70 a 80
Dimensions Overall length (mm)
10inch(250mm) 20inch(500mm) 30inch(750mm)
Outside diameter (mm)
70
Inside diameter (mm)
25.9
Filter surface area (cm2) 4200 2700 3900
Max. operating temperature (℃) 80
Max. operating pressure (MPa) 0.49

* [Filter surface area] indicates surface area per every 10 inches of length.
* [Max. operating temperature] indicates maximum operating temperature when passing water (hot water) through the filter media.
* [Filter rating] a= absolute, n = nominal rating

Model code
A-GPE
a~c
Filter rating
Code Rating
015
abs.
1.5μm
020 abs.
2.0μm
030 abs.
3.0μm
040 abs.
5.0μm

060

abs.
6.0μm
01X abs.
7.0μm
03X abs.
10μm
05X abs.
23μm
10X abs.
30μm
30X abs.
42μm
40X abs.
40μm
50X abs.
50μm
60X abs.
60μm
70X abs.
70μm
80X abs.
80μm
d
Length indicator
Code Length
1
10
inch
2
20
inch
3
30
inch
e
Seal shape
Code Shape
F Flat DOE
T 226 O-ring SOE
Fin○
P 226 O-ring SOE
Fin×
W 222 O-ring SOE
Fin○
M 222 O-ring SOE
Fin×
  • DOE;Double Open End
    (both ends open)
  • SOE;Single Open End (bottom end open)
  • Fin○;Finned
  • Fin×;Finless
f
Gasket / O-ring material
Code Material
N
NBR
S
Silicon
E
EPR
V
FPM
T PTFE (gasket)
F PFA capsule
(O-ring)
R Soft PTFE
(gasket)
Flow rate / pressure drop characteristics
Flow rate / pressure drop characteristics
Asahi Kasei Corporation

Applied Products Sales Department, Nonwoven Fabrics Division
Hibiya Mitsui Tower 1-1-2 Yurakucho, Chiyoda-ku, Tokyo 100-0006, JAPAN
TEL 03(6699)3804
FAX 03(6699)3882

Contact us

Product Variations

EUTEC™ MS

PLANNING CARD

Contact us

EUTEC™ Site map