EUTEC™ MF Microfilters (solid-liquid separation)

EUTEC™ MF / AM series product description

PP unwoven + PET unwoven Density gradient typeA-MWX

For filtration of irregular-shaped particles, gels and other particle matter

(1) Applications Filtration of irregular-shaped particles, gels and other particle matter
(2) Characteristics Effective in the filtration of irregular-shaped particles due to their large density gradient, created through the combination of various filter media
(3) Materials PP + PET
(4) Filter rating abs 1.0μm ~ abs 7.0μm
(5) Dimensions OD (outer diameter) φ70 x 10 inch ~ 30 inch
(6) Max. operating temperature 80℃ (*may vary depending on target fluid)
(7) Max. operating pressure 0.49MPa
Materials
1. External casing
Polypropylene (PP)
2. Secondary filter media
Polypropylene (PP)
3. Main filter media Polypropylene (PP)
polyester (PET)
4. Internal casing Polypropylene (PP)
5. Plate
Polypropylene (PP)
6. Gasket
 
Specifications
A-MWX series 010 020 030 050 070
Absolute filter rating (μm) 0.1 0.2 0.3 0.5 0.7
Dimensions Overall length (mm)
10inch(250mm) 20inch(500mm) 30inch(750mm)
Outside diameter (mm)
70
Inside diameter (mm)
25.9
Filter surface area (cm2) 5600 4100 2100 2200
Max. operating temperature (℃) 80
Max. operating pressure (MPa) 0.49

* [Filter surface area] indicates surface area per every 10 inches of length.
* [Max. operating temperature] indicates maximum operating temperature when passing water (hot water) through the filter media.

Model code
A-MWX
a~c
Filter rating
Code Rating
010
abs.
1.0μm
020 abs.
2.0μm
030 abs.
3.0μm
050 abs.
5.0μm
070 abs.
7.0μm
d
Length indicator
Code Length
1
10
inch
2
20
inch
3 30
inch
e
Filter rating
Code Shape
F
Flat DOE
T
226 O-ring SOE
Fin○
P
226 O-ring SOE
Fin×
W
222 O-ring SOE
Fin○
M 222 O-ring SOE
Fin×
  • DOE;Double Open End
    (both ends open)
  • SOE;Single Open End
    (bottom end open)
  • Fin○;Finned
  • Fin×;Finless
f
Gasket / O-ring material
Code Material
N
NBR
S
Silicon
E
EPR
V
FPM
T PTFE (gasket)
F PFA capsule (O-ring)
R Soft PTFE (gasket)
Flow rate / pressure drop characteristics
Flow rate / pressure drop characteristics
Asahi Kasei Corporation

Applied Products Sales Department, Nonwoven Fabrics Division
Hibiya Mitsui Tower 1-1-2 Yurakucho, Chiyoda-ku, Tokyo 100-0006, JAPAN
TEL 03(6699)3804
FAX 03(6699)3882

Contact us

Product Variations

EUTEC™ MS

PLANNING CARD

Contact us

EUTEC™ Site map