EUTEC™ MF Microfilters (solid-liquid separation)

EUTEC™ MF / AM series product description

Hydrophilic PTFE membrane High-precision rated filter A-TWP

For filtration of pure water, acids, alkalis, photoresists and various other chemicals

(1) Applications Microfiltration of pure water, acids, alkalis, photoresists and various other chemicals
(2) Characteristics Feature a pre-treated PTFE membrane that eliminates the need for hydrophilic processing before use
(3) Materials PTFE + PP
(4) Filter rating abs 0.2μm ~ 5.0μm
(5) Dimensions OD (outer diameter) φ70 x 10 inch ~ 30 inc
(6) Max. operating temperature 80℃ (*may vary depending on target fluid)
(7) Max. operating pressure 0.29MPa
Materials
1. External casing
Polypropylene (PP)
2. Support net
Polypropylene (PP)
3. Secondary filter media
Polypropylene (PP)
4. Main filter media
PTFE & PP
5. Support net
Polypropylene (PP)
6. Internal casing
Polypropylene (PP)
7. Plate
Polypropylene (PP)
8. Gasket  
Specifications
A-TWP series 020 045 100 500
Absolute filter rating (μm) 0.2 0.45 1.0 5.0
Dimensions Overall length (mm)
10inch(250mm) 20inch(500mm) 30inch(750mm)
Outside diameter (mm)
70
Inside diameter (mm)
25.9
Filter surface area (cm2) 7000
Max. operating temperature (℃) 80
Max. operating pressure (MPa) 0.29

* [Filter surface area] indicates surface area per every 10 inches of length.
* [Max. operating temperature] indicates maximum operating temperature when passing water (hot water) through the filter media.

Model code
A-TWP
a~c
Filter rating
Code Rating
020
abs.
0.2μm
045
abs.
0.45μm
100
abs.
1.0μm
500 abs.
5.0μm
d
Length indicator
Code Length
1
10
inch
2
20
inch
3
30
inch
e
Seal shape
Code Shape
F Flat DOE
T 226 O-ring SOE
Fin○
P 226 O-ring SOE
Fin×
W 222 O-ring SOE
Fin○
M 222 O-ring SOE
Fin×
  • DOE;Double Open End
    (bottom end open)
  • SOE;Single Open End (bottom end open)
  • Fin○;Finned
  • Fin×;Finless
f
O-ring material
Code Material
N
NBR
S
Silicon
E
EPR
V
FPM
T PTFE (gasket)
F PFA capsule
(O-ring)
R Soft PTFE
(gasket)
Flow rate / pressure drop characteristics
Flow rate / pressure drop characteristics
Asahi Kasei Corporation

Applied Products Sales Department, Nonwoven Fabrics Division
Hibiya Mitsui Tower 1-1-2 Yurakucho, Chiyoda-ku, Tokyo 100-0006, JAPAN
TEL 03(6699)3804
FAX 03(6699)3882

Contact us

Product Variations

EUTEC™ MS

PLANNING CARD

Contact us

EUTEC™ Site map