EUTEC™ MF Microfilters (solid-liquid separation)

EUTEC™ MF / AM series product description

100% polypropylene High flow-rate typeA-VWP

For high flow-rate filtration of strong acids, strong alkalis and various organic solvents

(1) Applications High flow-rate final-stage filtration of ultrapure water, plating fluids, etching fluids and other such fluids
(2) Characteristics Utilize PES membrane with superior cleanliness characteristics, enabling recovery of specific resistance with minimal rinsing
(3) Materials PP
(4) Filter rating abs 5.0μm ~ 30μm
(5) Dimensions OD (outer diameter) φ83 x 10 inch ~ 30 inc
(6) Max. operating temperature 80℃ (*may vary depending on target fluid)
(7) Max. operating pressure 0.49MPa
Materials
1. External casing
Polypropylene (PP)
2. Secondary filter media
Polypropylene (PP)
3. Main filter media
Polypropylene (PP)
4. Secondary filter media
Polypropylene (PP)
5. Internal casing Polypropylene (PP)
6. Plate
Polypropylene (PP)
7. O-ring
 
Specifications
A-VWP series 040 060 01X 03X 05X 10X
Absolute filter rating (μm) 5.0 6.0 7.0 10 23 30
Dimensions Overall length (mm)
10inch(241.5) 20inch(501.4mm) 30inch(760.3mm)
Outside diameter (mm)
83
Inside diameter (mm)
28
Filter surface area (cm2) 4600 4500 5400 5900
Max. operating temperature (℃) 80
Max. operating pressure (MPa) 0.49

* [Filter surface area] indicates surface area per every 10 inches of length.
* [Max. operating temperature] indicates maximum operating temperature when passing water (hot water) through the filter media.

Model code
A-VMP
a~c
Filter rating
Code Rating
040
abs.
5.0μm
060 abs.
6.0μm
01X abs.
7.0μm
03X abs.
10μm
05X abs.
23μm
10X abs.
30μm
d
Length indicator
Code Length
1
10
inch
2
20
inch
3
30
inch
e
Seal shape
Code Shape
B
226 O-ring SOE
Fin×
M
222 O-ring SOE
Fin×
  • SOE;Single Open End
    (bottom end open)
  • Fin×;Finless
f
O-ring material
Code Material
N
NBR
S
Silicon
E
EPR
V
FPM
F PFA capsule
Flow rate / pressure drop characteristics
Flow rate / pressure drop characteristics
Asahi Kasei Corporation

Applied Products Sales Department, Nonwoven Fabrics Division
Hibiya Mitsui Tower 1-1-2 Yurakucho, Chiyoda-ku, Tokyo 100-0006, JAPAN
TEL 03(6699)3804
FAX 03(6699)3882

Contact us

Product Variations

EUTEC™ MS

PLANNING CARD

Contact us

EUTEC™ Site map