EUTEC™ MF Microfilters (solid-liquid separation)

EUTEC™ MF / AM series product description

PET filter media + PP components Standard typeAME

For filtration on water cleaning lines, and filtration of various organic solvents

(1) Applications Filtration on water cleaning lines, and filtration of various organic solvents
(2) Characteristics Standard type filters with PET microfiber filter media and PP components
(3) Materials PET + PP
(4) Filter rating abs 0.8μm ~ abs 67μm
(5) Dimensions OD (outer diameter) φ70 x 10 inch ~ 30 inc
(6) Max. operating temperature 80℃ (*may vary depending on target fluid)
(7) Max. operating pressure 0.49MPa
Materials
1. External casing
Polypropylene (PP)
2. Support net
Polypropylene (PP)
3. Secondary filter media
Polyester (PET)
4. Main filter media
Polyester (PET)
5. Support net
Polypropylene (PP)
6. Internal casing
Polypropylene (PP)
7. Plate
Polypropylene (PP)
8. Gasket  
Specifications
AME series 006 012 018 022 045 100
Absolute filter rating (μm) 0.8 1.2 1.8 2.0 4.0 6.0
Dimensions Overall length (mm)
10inch(250mm) 20inch(500mm) 30inch(750mm)
Outside diameter (mm)
70
Inside diameter (mm)
25.9
Filter surface area (cm2) 3200 3800 4400 5300 4800
Max. operating temperature (℃) 80
Max. operating pressure (MPa) 0.49
AME series 300 500 10E 20E 40E
Absolute filter rating (μm) 10 13 23 35 67
Dimensions Overall length (mm)
10inch(250mm) 20inch(500mm) 30inch(750mm)
Outside diameter (mm)
70
Inside diameter (mm)
25.9
Filter surface area (cm2) 5800 3900 4400 5800
Max. operating temperature (℃) 80
Max. operating pressure (MPa) 0.49

* [Filter surface area] indicates surface area per every 10 inches of length.
* [Max. operating temperature] indicates maximum operating temperature when passing water (hot water) through the filter media.

Model code
AME
a~c
Filter rating
Code Rating
006
abs.
0.8μm
012 abs.
1.2μm
018 abs.
1.8μm
022 abs.
2.0μm
045 abs.
4.0μm
100 abs.
6.0μm
300 abs.
10μm
500 abs.
13μm
10E abs.
23μm
20E abs.
35μm
40E abs.
67μm
d
Length indicator
Code Length
1
10
inch
2
20
inch
3 30
inch
e
Filter rating
Code Shape
F
Flat DOE
T
226 O-ring SOE
Fin○
P
226 O-ring SOE
Fin×
W
222 O-ring SOE
Fin○
M 222 O-ring SOE
Fin×
  • DOE;Double Open End
    (both ends open)
  • SOE;Single Open End
    (bottom end open)
  • Fin○;Finned
  • Fin×;Finless
f
Gasket/O-ring material
Code Material
N NBR
S
Silicon
E
EPR
V
FPM
T PTFE (gasket)
F PFA capsule
(O-ring)
R Soft PTFE
(gasket)
Flow rate / pressure drop characteristics
Flow rate / pressure drop characteristics
Asahi Kasei Corporation

Applied Products Sales Department, Nonwoven Fabrics Division
Hibiya Mitsui Tower 1-1-2 Yurakucho, Chiyoda-ku, Tokyo 100-0006, JAPAN
TEL 03(6699)3804
FAX 03(6699)3882

Contact us

Product Variations

EUTEC™ MS

PLANNING CARD

Contact us

EUTEC™ Site map