EUTEC™ MF Microfilters (solid-liquid separation)

EUTEC™ MF / AM series product description

PES membrane filter Standard typeAMSP

For final filtration of ultrapure water, plating and etching fluids, etc.

(1) Applications Final-stage filtration of ultrapure water, plating fluids, etching fluids and other such fluids
(2) Characteristics High-precision rated microfilters that utilize a high-void (high-porosity) PES membrane with a sharp pore gradient
(3) Materials PES + PP
(4) Filter rating abs 0.1μm ~ 0.4μm
(5) Dimensions OD (outer diameter) φ70 x 10 inch ~ 30 inc
(6) Max. operating temperature 80℃ (*may vary depending on target fluid)
(7) Max. operating pressure 0.39MPa
Materials
1. External casing
Polypropylene (PP)
2. Secondary filter media
Polypropylene (PP)
3. Main filter media
Polyethersolfone (PES)
4. Secondary filter media
Polypropylene (PP)
5. Internal casing
Polypropylene (PP)
6. Plate
Polypropylene (PP)
7. Gasket
 
Specifications
AMSP series 010 020 045
Absolute filter rating (μm) 0.1 0.2 0.45
Dimensions Overall length (mm)
10inch(250mm) 20inch(500mm) 30inch(750mm)
Outside diameter (mm)
70
Inside diameter (mm)
25.9
Filter surface area (cm2) 7000
Max. operating temperature (℃) 80
Max. operating pressure (MPa) 0.39

* [Filter surface area] indicates surface area per every 10 inches of length.
* [Max. operating temperature] indicates maximum operating temperature when passing water (hot water) through the filter media.

Model code
AMSP
a~c
Filter rating
Code Rating
010
abs.
0.1μm
020
abs.
0.2μm
045
abs.
0.45μm
d
Length indicator
Code Length
1
10
inch
2
20
inch
3
30
inch
e
Seal shape
Code Shape
F Flat DOE
T 226 O-ring SOE
Fin○
P 226 O-ring SOE
Fin×
W 222 O-ring SOE
Fin○
M 222 O-ring SOE
Fin×
  • DOE;Double Open End
    (both ends open)
  • SOE;Single Open End (bottom end open)
  • Fin○;Finned
  • Fin×;Finless
f
Gasket / O-ring material
Code Material
N
NBR
S
Silicon
E
EPR
V
FPM
T PTFE (gasket)
F PFA capsule
(O-ring)
R Soft PTFE
(gasket)
Flow rate / pressure drop characteristics
Flow rate / pressure drop characteristics
Asahi Kasei Corporation

Applied Products Sales Department, Nonwoven Fabrics Division
Hibiya Mitsui Tower 1-1-2 Yurakucho, Chiyoda-ku, Tokyo 100-0006, JAPAN
TEL 03(6699)3804
FAX 03(6699)3882

Contact us

Product Variations

EUTEC™ MS

PLANNING CARD

Contact us

EUTEC™ Site map