EUTEC™ MF Microfilters (solid-liquid separation)

EUTEC™ MF / AM series product description

Cotton polypropylene wound yarn-type filterAMWSC/AMWPP

Our most economical general-use wind-type filter

(1) Applications Our most economical general-use wind-type filter
(2) Characteristics This filter has a pore gradient created through a special winding technique, in which the outside of the filter media has wide pores, and the filter rating gradually becomes finer towards the inside. This structure prevents the rapid occurrence of blockages.
(3) Materials AMWSC: Cotton yarn + SUS304
AMWPP: PP + PP
(4) Filter rating nom 1.0μm ~ nom 100μm
(5) Dimensions OD (outer diameter) φ60 x 10 inch ~ 30 inc
(6) Max. operating temperature AMWSC: 150℃ (*may vary depending on target fluid)
AMWPP: 80℃ (*may vary depending on target fluid)
(7) Max. operating pressure 0.49MPa
Materials
Specifications
AMWSC/AMWPP 01X 03X 05X 10X 25X 50X 100
Nominal filter rating (μm) 1.0 3.0 5.0 10 25 50 100
Dimensions Overall length (mm)
10inch(250mm) 20inch(500mm) 30inch(750mm)
Outside diameter (mm)
60
Inside diameter (mm) 30
Materials Filter media
Cotton (AMWSC) / polypropylene (AMWPP)
Cartridge SUS304 (AMWSC) / polypropylene (AMWPP)
Max. operating temperature (℃) 150 (AMWSC) / 80 (AMWPP)
Max. operating pressure (MPa) 0.49

* [Max. operating temperature] indicates maximum operating temperature when passing water (hot water) or steam through the filter media.

Model code
AMWSC/AMWPP
a~c
Filter rating
Code Rating
01X
nom.
1.0μm
03X nom.
3.0μm
05X nom.
5.0μm
10X nom.
10μm
25X nom.
25μm
50X nom.
50μm
100 nom.
100μm
d
Length indicator
Code Length
1
10
inch
2
20
inch
3 30
inch
Flow rate / pressure drop characteristics
Flow rate / pressure drop characteristics
Asahi Kasei Corporation

Applied Products Sales Department, Nonwoven Fabrics Division
Hibiya Mitsui Tower 1-1-2 Yurakucho, Chiyoda-ku, Tokyo 100-0006, JAPAN
TEL 03(6699)3804
FAX 03(6699)3882

Contact us

Product Variations

EUTEC™ MS

PLANNING CARD

Contact us

EUTEC™ Site map