Hemodialyzer / APS-H: Hemodiafilter - Best suitability for HDF.





APS-H specifications

Membrane Asahi Polysulfone
Internal Diameter of Hollow Fiber (μm) 200
Wall Thickness of Hollow Fiber (μm) 45
Priming Volume (mL) 105 114
Maximum TMP (mmHg (kPa)) 500 (66)
Maximum Blood Flow (mL/min) 500
Maximum Dialysate Flow (mL/min) 800
Dimensions (mm[L] x mm[D]) 330 x 42 330 x 44
Weight (g) 486 510
Sterilization Gamma-Ray

Note: High permeability devices. Use only with ultrafiltration controlling equipment. ISO 8637:2010

APS is a trademark of Asahi Kasei Medical Co., Ltd.

Contact Us

Please feel free to send us any questions you may have about our products and support.

Contact Us

Your Voice

Share your feelings and experiences when using our products.

Your Voice
Note: It might be required in your country that medical devices shall be officially registered and/or approved by an authorized organization. Please contact our representative in your region or contact us to confirm whether the listed products are approved for use. These information may contain general information on medical-related topics and is not meant to provide specialist advice or instructions concerning the products and services sold by Asahi Kasei Medical. Please contact us directly for special inquiries. You should not use this information for diagnosing a health problem or disease but should always consult your own physician.Contact us

Top of page