AsahiKASEI

AsahiKASEI

SUNTEC FOAM™

Contributes to total cost reduction
Non-crosslinked, Extruded, Closed-cell polyethylene foam

SUNTEC FOAM™ is an extruded polyethylene foam, used mainly as a cushioning material.
Products are protected against shocks by cushioning that is optimally designed using a wealth of technical data.
This avoids excessive packaging and helps to keep product costs down.

押出発泡体 ポリエチレン系 独立気泡構造

押出発泡体 ポリエチレン系 独立気泡構造

A feature is its use for a wide range of applications

SUNTEC FOAM™ is suited as a component material for these applications.
Please contact us, if you have any questions.

  • High-performance cushioning material

    High-performance cushioning material

  • Returnable packaging

    Returnable packaging

  • Building materials, Other, Insulating materials

    Building materials, other daily goods, insulating materials

Available in a wide range of foam grades

Available in a wide range of foam grades

Various grades of SUNTEC FOAM™ are suited for various applications.

See here for details

Proposal of total solutions

Proposal of total solutions
  • Reduced packaging size, one-way packaging, etc.

Standard specifications

Name Size Pieces/bag
Q05 50mm×510mm×2400mm 5 pieces/bag
Q15 40mm×510mm×2400mm 7 pieces/bag
50mm×510mm×2400mm 6 pieces/bag
Q25 40mm×510mm×2400mm 15 pieces/bag
50mm×510mm×2400mm 12 pieces/bag
60mm×510mm×2400mm 10 pieces/bag
Q35 40mm×510mm×2400mm 15 pieces/bag
50mm×510mm×2400mm 12 pieces/bag
60mm×510mm×2400mm 10 pieces/bag
40mm×610mm×2400mm 11 pieces/bag
50mm×610mm×2400mm 10 pieces/bag
60mm×610mm×2400mm 9 pieces/bag
G25 50mm×600mm×2400mm 10 pieces/bag
A25 50mm×510mm×2400mm 12 pieces/bag
60mm×510mm×2400mm 10 pieces/bag
A35 50mm×510mm×2400mm 12 pieces/bag
60mm×510mm×2400mm 10 pieces/bag
B45 40mm×610mm×2400mm 11 pieces/bag
50mm×610mm×2400mm 9 pieces/bag
Q35THS 38mm×510mm×2400mm 15 pieces/bag
48mm×510mm×2400mm 12 pieces/bag
58mm×510mm×2400mm 10 pieces/bag
B45THS 38mm×610mm×2400mm 11 pieces/bag
48mm×610mm×2400mm 9 pieces/bag
V45 40mm×610mm×2400mm 11 pieces/bag
50mm×610mm×2400mm 9 pieces/bag

Physical properties

Properties Test Methods Unit Q05 Q15 Q25
A25
G25		 Q35/Q35TH
A35		 B45/B45TH
V45
Denisty Nominal Value kg/m3 100 70 40 35 28
Compressive
Stress		 AK-FOAM Method
（refer to JIS K 6767）
@25% compression, 10mm/min		 kPa 201 129 68 56 51
Compression
Set		 AK-FOAM Method
（refer to JIS K 6767）
c.s. % (25%, 22h, 23℃)
→24h after strain release		 % 2 2 3 3 3
Thermal
Conductivity		 AK-FOAM Method
（refer to JIS A 1412-2）
@mean temp 0℃		 W/(m・K) 0.057 0.053 0.049 0.053 0.053
Surface
Regisistivity*		 AK-FOAM Method
（refer to JIS K 6911）
23℃, 50%RH		 skin surface Ω 6x1010 4x1011 7x1010

*Value of anti-static type ,,
Q35TH and B45TH have the physical properties of the foam part excluding the skin part
All values shown in this table are given as typical laboratory averages, intended to serve only as approximate guides and not as specifications.