POSSIBL™

What is POSSIBL™?

POSSIBL™, Nonwoven for civil engineering applications is made with Polyester Spunbond & Needle punch, a revolutionary continuously filament yarn developed exclusively with Asahi Kasei's technology.
In addition to featuring unrivaled mechanical strenght, weatherability and chemical resistance, POSSIBL™ also meets all other requirements of a geotextile, including excellent water permeability and filter performance.

Outstanding features make POSSIBL™ the best choice

Mechanical strength

POSSIBL™, the thick denier thread ensures high tensile and tear strength. Physical properties differ only minimally in the vertical, lateral and diagonal directions.

Weatherability and chemical resistance

Being made of polyester yarn, POSSIBL™ features the high water resistance, oil resistance, weatherability, rot resistance and heat resistance needed for stable, long-term performance under harsh conditions

Water permeability and filter performance

Thanks to its three-dimensional polyester yarn structure, the sheet exhibits superb water permeability and particularly excels in filter performance.

Workability

Light in weight and low in bulk, POSSIBL™ is easy to transport and install. Cuts job time, maximizes safety.

HARBOR

Function: Filtration, Scour Prevention, Protection

RIVER

Function: Filtration, Scour Prevention, Protection

SOIL REINFORCEMENT

Function: Drainage, Stabilization, Consolidation settlement, Control for thickness of layer

STABILITY OF SOFT GROUND

Function: Drainage, Stabilization, Separation

PROTECTION FOR LINERS

Function: Protection, Drainage

DRAINAGE FILTER

Function: Separation, Filtration,

GROUND, GOLF COURSE

Function: Separation, Filtration,

PAVEMENT

Function: Separation, Filtration,

POSSIBL™ Specifications

Composition : 100% Polyester,Spunbond Continuously Filament Yarn
Construction : Needle Punched

Type			AK-100	AK-150	AK -200	AK-300	AK -400	AK-500	AK-800	AK-65N	Remark
Color			Black	Black	Black	Black	Black	Black	Black	Black
Size (W × L in meters)		STD	2×100	2×50	2×50	2×50	2×50	2×50	2×50	1• 2×200
		Special Order	2×200	2×100	2×100	2×100					JIS L-1908
		Special Order		4×100	4×100	4×50	4×50	4×50	4×50
Weight		g/m²	100	150	200	300	400	500	800	65
Tensile Strength	Warp	KN/m	4.9	6.8	8.8	15.6	20	35.3	54.8	1.9
		N/5cm	245	340	440	790	1000	1765	2740	95
		kgf/5cm	25	35	45	80	105	180	280	10
	Weft	KN/m	3.5	6.8	7.8	12.7	20	23.5	49	1.5
		N/5cm	176	340	390	635	1000	1175	2450	75
		kgf/5cm	18	35	40	65	105	120	250	8
Elongation	Warp	％	50	55	55	55	60	60	65	50
Elongation	Weft	％	50	50	50	50	60	60	60	50

*The values shown above are an example based on test results.
Some differences may arise between products.
*The aboves are subject to change without prior notice.