Imparting Impact Resistance to Polar Resins
Enables Adhesion to Metals, etc.
TUFTEC™ M1911 is a maleic anhydride-grafted SEBS. It can be used as an impact modifier for polar resins such as polyamide (PA) and engineering plastics. It can also be used for bonding applications involving metals and polar resins.
Overview of TUFTEC™ M1911 Grades
Features of TUFTEC™ M1911
Maleic anhydride-grafted SEBS
Excellent adhesion to metals and polar resins
Enables impact modification of engineering plastics such as polyamide (PA)
Can be used as a compatibilizer for styrene-based, olefin-based, and polar resins
Typical Applications and Uses of TUFTEC™ M1911
Property Table of TUFTEC™ M1911
Test Condition | Unit | M1911 | ||
Modification | - | - | Maleic anhydride | |
Grafted Rate | Titration method | wt% | 0.4 | |
Density | ISO 1183 | g/cm3 | 0.93 | |
Styrene | Asahi Kasei method | wt% | 31 | |
MFR | 230°C・ 2.16kg |
ISO 1133 | g/10min | 4.2 |
A Hardness | 0s | ISO 7619 | - | 76 |
10s | 74 | |||
Tensile Properties | 100%Mo. | ISO 37 | MPa | 4.8 |
200%Mo. | MPa | 5.3 | ||
300%Mo. | MPa | 6.8 | ||
Tensile Strength | MPa | 16.0 | ||
Elongation at Break | % | 622 | ||
Melt Viscosity (200°C) |
122(1/s) | Asahi Kasei method | Pa・s | 1,861 |
1.216(1/s) | 417 | |||
Melt Viscosity (230°C) |
122(1/s) | Asahi Kasei method | Pa・s | 907 |
1.216(1/s) | 267 | |||
tanδ Peak Temperature | Torsion mode, 1Hz |
°C | -47 | |
Refractive Index | JIS K 7142 | - | 1.51 | |
Product Form | - | - | Pellets |
IMPORTANT NOTICE REGARDING MEDICAL APPLICATIONS
We, Asahi Kasei Group, request that customers who are considering using our products in medical, pharmaceutical, cosmetic and other related applications (hereinafter collectively called “Medical Applications”) shall contact us and confirm our policy on Medical Applications in advance. Please consult with us for the latest status. We make no guarantees or warranties, express or implied, concerning the suitability of our products for use in Medical Applications. It is not our responsibility to determine if our products are safe, lawful, and technically suitable for intended applications.