S.O.E.™ S1606

S.O.E.™ S1606 is a special SEBS with low resilience. It can improve scratch resistance and wear resistance. It can also be used as a modifier for COP and COC.

Active as a raw material, compatibilizer, and modifier

S.O.E.™ S1606 is a special SEBS with low resilience. It can improve wear resistance when blended with TPE compounds. It can also be used as a modifier for cyclic polyolefins (COP, COC).

Overview of S.O.E.™ S1606 grades

Features of S.O.E.™ S1606

Special SEBS with a copolymer type soft block

Can modify the impact resistance of cyclic polyolefins (COC, COP)

Improves the wear resistance of TPE compounds

Typical applications and usage of S.O.E.™ S1606

Automotive Interior Trim

Medical Tubes

Automotive Parts

Physical Property Table of S.O.E.™ S1606

		Test Condition	Unit	S1606
Hydrogenation		-	-	Complete
Density		ISO 1183	g/cm³	0.96
Styrene		Asahi Kasei Method	wt%	51
MFR	230°C・ 2.16kg	ISO 1133	g/10min	4.5
A Hardness	0s	ISO 7619	-	63
A Hardness	10s	ISO 7619	-	60
Tensile Properties	100%Mo.	ISO 37	MPa	2
	200%Mo.		MPa	2.8
	300%Mo.		MPa	4.3
	Tensile Strength		MPa	17.0
	Elongation at Break		%	466
Melt Viscosity (200°C)	122(1/s)	Asahi Kasei Method	Pa・s	2,338
Melt Viscosity (200°C)	1.216(1/s)	Asahi Kasei Method	Pa・s	527
Melt Viscosity (230°C)	122(1/s)	Asahi Kasei Method	Pa・s	1,407
Melt Viscosity (230°C)	1.216(1/s)	Asahi Kasei Method	Pa・s	392
tanδ Peak Temperature		Torsion Mode, 1Hz	°C	-14
Refractive Index		JIS K 7142	-	1.54
Product Form		-	-	Pellets

IMPORTANT NOTICE REGARDING MEDICAL APPLICATIONS

We, Asahi Kasei Group, request that customers who are considering using our products in medical, pharmaceutical, cosmetic and other related applications (hereinafter collectively called “Medical Applications”) shall contact us and confirm our policy on Medical Applications in advance. Please consult with us for the latest status. We make no guarantees or warranties, express or implied, concerning the suitability of our products for use in Medical Applications. It is not our responsibility to determine if our products are safe, lawful, and technically suitable for intended applications.