TUFTEC™ H1043

TUFTEC™ H1043 is a fully hydrogenated SEBS with a high styrene ratio. It can modify various resins, such as COC, COP, PS, and PPE.

High-styrene SEBS that can modify various resins

TUFTEC™ H1043 is a high-styrene SEBS with excellent compatibility with styrene-based resins and PPE. It is used as a compatibilizer for PE/PS and as an impact modifier for cyclic polyolefins (COP, COC).

Overview of TUFTEC™ H1043 Grade

Features of TUFTEC™ H1043

High styrene content SEBS

Can improve the impact resistance of cyclic polyolefins (COP, COC)

Can be used as a modifier for AS resin, ABS resin, PPE, etc.

Compatibility with polystyrene (PS) and polyphenylene ether (PPE)

Can be used as a compatibilizer for PE/PS

Typical Applications and Uses of TUFTEC™ H1043

Food Containers

Compatibilizer for Styrene-Based Resins and Olefin-Based Resins

Physical Property Table of TUFTEC™ H1043

		Test Conditions	Unit	H1043
Density		ISO 1183	g/cm³	0.98
Styrene		Asahi Kasei method	wt%	67
MFR	230°C・ 2.16kg	ISO 1133	g/10min	1.6
A Hardness	0s	ISO 7619	-	＞90
A Hardness	10s	ISO 7619	-	＞90
D Hardness	0s	ISO7619	-	67
D Hardness	10s	ISO7619	-	64
Tensile Properties	100%Mo.	ISO 37	MPa	Break
	200%Mo.		MPa	Break
	300%Mo.		MPa	Break
	Tensile Strength at Break		MPa	35.6
	Elongation at Break		%	<100
Melt Viscosity (200°C)	122(1/s)	Asahi Kasei method	Pa・s	685
Melt Viscosity (200°C)	1.216(1/s)	Asahi Kasei method	Pa・s	227
Melt Viscosity (230°C)	122(1/s)	Asahi Kasei method	Pa・s	321
Melt Viscosity (230°C)	1.216(1/s)	Asahi Kasei method	Pa・s	83
tanδ Peak Temperature		Torsion mode, 1Hz	°C	-57
Refractive Index		JIS K 7142	-	1.55
Product Form		-	-	Pellet

IMPORTANT NOTICE REGARDING MEDICAL APPLICATIONS

We, Asahi Kasei Group, request that customers who are considering using our products in medical, pharmaceutical, cosmetic and other related applications (hereinafter collectively called “Medical Applications”) shall contact us and confirm our policy on Medical Applications in advance. Please consult with us for the latest status. We make no guarantees or warranties, express or implied, concerning the suitability of our products for use in Medical Applications. It is not our responsibility to determine if our products are safe, lawful, and technically suitable for intended applications.